Moving into a brand new home is a big change and can be a daunting task. The process of moving often involves hard work and a lot of unpacking. But before you start with the fun part of moving in, you need to take care of the basics. This means that you need to clean your home and that includes giving your carpets a good clean. To help you out with the process, we are giving you some tips for cleaning carpets before moving into a brand new home.
Should you hire professionals for cleaning carpets before moving into a brand new home
When moving professionals from Zippy Shell of Greater Philadelphia bring all your belongings to your new address, before you start unpacking, take advantage of the empty space to deep clean your home. You will have the opportunity to clean your carpets, tiles, and hardwood flooring without furniture in the house. If you purchased a newly-built home, the contractors may have dispersed dust and building-material debris deep into the carpet’s fibers. That is why you should consider hiring a professional if you want your brand new home to sparkle.
How to clean the carpet yourself
Cleaning the carpets will refresh your home and prepare it for the new life you have planned for it. Even though the upsides of hiring professional cleaning services are plenty, you may clean your carpets yourself, and you may do a half-decent job at it too. (At least it’s better than nothing as long as you don’t use too much soap or leave your carpets soaked with too much water.) Cleaning your carpets thoroughly is important because there are allergens, dust mites and other pathogens in your carpets that can lead to the following health problems:
- respiratory distress, such as asthma
- skin irritation and infections
- allergic reactions
The reasons above are enough to do your best, as cleaning carpets before moving into a brand new home will mitigate these health problems.
First, vacuum your carpets
For successful home carpet cleaning, you must prepare your carpet first. This means that you have to sweep the carpet in short, firm strokes to loosen the fibers and free up the dirt. Take your time when vacuuming the carpets, especially if you have a plush carpet in which dirt is sure to be deeply embedded.
It is not enough to vacuum the carpet only once, so you should go over the entire carpet several times, and work slowly to allow the suction to remove all the ground-in dust and dirt. While vacuuming, pay special attention to the areas of heavy traffic near doorways. Also, try to sprinkle baking soda over the carpet, and allow it to sit for one hour before vacuuming to remove any odors. If you, for example, have a cat, you can use baking soda to clean and remove cat odors from the carpet.
Remove the stains
Spots and spills happen to just about every carpet and can be difficult to remove. Your carpet has a lot of potential enemies, from chewing gum to wine. To deal with these annoying stains you need to have a white cloth and the right carpet cleaner. There are a variety of commercial carpet detergents and there are many “all-purpose” removers, but you need to find the one for your stain and your carpet type. They typically come in spray bottles or cans to make stain cleaning easier. Some products may be inappropriate for your carpet, so it is best to test it first in a discreet place.
Apply the product to a clean white cloth and gently rub the stain, because if you press hard or rub vigorously you can drive the stain deeper into the fibers. Patience is an important part of home carpet cleaning. So, once you have applied the solution to your carpet, leave it to dwell for 15 minutes. After applying the product, use a fresh clean white cloth and water to wash up the cleaning solution. Do not soak the carpet with too much water, as it may be absorbed into the pad beneath, leading to problems with mold.
Use a carpet steam cleaner
The most effective carpet-cleaning method is to use a carpet steam cleaner. All you need to do is fill the canister of the cleaner with hot water and fill the detergent bin with the approved amount of cleaning agent and water. Start cleaning in the farthest corner of the room and work your way to the exit so you won’t have to step onto the wet part of the carpet.
Empty and refill the hot water tank as needed when it becomes filled with dirty water. If you don’t own a carpet steam cleaner, you can rent a machine from a hardware or home-improvement store. To dry your carpet, open the windows and ventilate the room with fresh air. If it’s too cold for that, turn on the central heating system and leave for a few hours to speed up the drying process.
Cleaning carpets before moving into your brand new home will give you a good starting place for the rest of your cleaning. Following these simple tips will make your carpets sparkle and after you are done with cleaning, you can move your household items with ease and begin your life in a brand new home. Just do not forget to clean your carpets regularly, as they will be easier to maintain.